Cardigan shrinking solution

Inject warm water into the washbasin, drip a small amount of household water with ammonia, and then immerse the sweater, and the soap residue left on the wool will dissolve. Gently stretch the reduced portion with both hands and then rinse to dry. When it is half dry, first open it by hand, and make it out of the original shape. If you iron it with a hot iron, you can restore the original size.

1. When cleaning normally, the more you wash, the more you can avoid it. The principle is to wash it once. ※2. Warm water + a small amount of household "Achenia" = Ashuna water ^^ After the reduced sweater is soaked, it can decompose the soap component of "trick egg". ※3. Gently pull the narrow part of the baby sweater ~ and flush. Please use "ironing" to burn while you are in the shape of the whole sweater.

By the way, how to prevent shrinkage:

(1) First, the water temperature is preferably around 35 degrees. It should be gently squeezed by hand when washing. Do not rub, twist or twist with your hands. Never use a washing machine to wash. Second, we must use a neutral detergent. When used, the ratio of water to detergent is 100:3. 3. When rinsing, slowly add cold water to gradually lower the water temperature to room temperature, then rinse off. 4. After washing, first press the hand to press the water out, then wrap it in a dry cloth, or use a centrifugal force dehydrator. Note that the sweater should be wrapped in a cloth before it can be placed in the dehydrator; it can not be dehydrated for too long, and can only be dehydrated for up to 2 minutes. 5. After washing and dehydrating, the sweater should be placed in a ventilated place to spread and dry, not to hang or expose to the sun, so as to avoid deformation of the sweater. I hope I can help you.

Sweater shrinks and saves

First, steam ironing

The shrink sweater fiber is heated with a steam iron, and then the fiber can be stretched with both hands while hot. According to experience, due to the limited heating area of ​​the steam iron, in order to ensure uniform fiber stretch, the sweater is partially, segmented, divided, and heated and stretched. It is impossible for the fiber to stretch a lot at a time, and it is necessary to repeatedly heat and stretch. Before stretching, the total length of the stretch should be counted, so that the stretch length of each segment is also counted. After the pull is completed, the total length is applied. If the length is insufficient, the length can be repeated. Pay special attention to the size, do not pull over the head, and finally make appropriate adjustments.

The operation should be carried out on the ironing table. A blanket can be placed on the tabletop at home. After completion, it is best to heat and shape the lens and cool it.

Second, thick cardboard

There is a way to enlarge the sweater after shrinking. The specific method is: cut the size and shape of the original sweater with cardboard (the cardboard of the household appliance box), and the cut is best polished with sandpaper to avoid hooking the sweater. Put the sweater on the cardboard, fix it with a few clothespins at the lower leg, and then use the electric iron to repeatedly steam the various parts of the sweater. After it is completely cooled, remove it.

Third, send a dry cleaner

Just take the clothes to the dry cleaners, dry-clean them first, then find the special shelf of the same model as the clothes, hang the sweater, and after the high-temperature steam treatment, the clothes can be restored to the original appearance, and the price is the same as the dry cleaning.

Reminder: After buying a sweater, pay attention to the label inside the clothes, do not wash the water on the sweater that needs dry cleaning.