[China Glass Network] In summer, the function of the door and window film can not be underestimated. A good energy-saving film can effectively prevent ultraviolet rays and strong sunlight, and play a role of heat insulation and shading. At the same time, the glass with energy-saving film can effectively protect the individual. The private space does not affect the lighting, so what problems should you pay attention to after the film is finished?
1. Do not move the glass within three days after installation of the window glass film, as it may contain water (the water has not evaporated yet), so it is better not to move.
Second, within 15 days after the glass is attached, do not use water to clean the film glass.
3. Do not use the adhesive to fix any items on the glass of the film, or attach stickers such as stickers on the window film.
4. The cleaning agent sprays the surface of the window film slightly and evenly, then gently wipes the window film with a clean, soft cotton cloth or absorbent cloth. The cotton cloth and the absorbent cloth often need to be wrung out and contained on the cotton cloth/absorbent cloth. Pure topical alcohol will quickly dissolve large stains and fatty fingerprints. If the stain is not washed, re-spray the cleaning solution, scrape the window film horizontally from top to bottom with a soft rubber wiper until it is dry, and dry the edge of the window film with a towel.
5. On the door and window film, because of the use of adhesive tape, even if it is attached or decal, clear the glue or glue remaining when these materials are used, you can gently scrub the contaminated area with a soft clean cotton cloth and acetone. These glues remaining on the window film are quickly and completely understood. A small amount of acetone does not damage the polyester film, but it immediately dissolves and completely evaporates the glue and most of the paint.
6. Do not use soft wipes, brushes, or sand.
SHAOXING SKYRISE TEXTILE CO.,LTD , https://www.eurofashiontextile.com