1. Do not move the glass within three days after installation of the window glass film, as it may contain water (the water has not evaporated yet), so it is better not to move.
Second, within 15 days after the glass is attached, do not use water to clean the film glass.
3. Do not use the adhesive to fix any items on the glass of the film, or attach stickers such as stickers on the window film.
4. The cleaning agent sprays the surface of the window film slightly and evenly, then gently wipes the window film with a clean, soft cotton cloth or absorbent cloth. The cotton cloth and the absorbent cloth often need to be wrung out and contained on the cotton cloth/absorbent cloth. Pure topical alcohol will quickly dissolve large stains and fatty fingerprints. If the stain is not washed, re-spray the cleaning solution, scrape the window film horizontally from top to bottom with a soft rubber wiper until it is dry, and dry the edge of the window film with a towel.
5. On the window film, because of the use of adhesive tape, even if it is attached or decal, clear the glue or glue remaining in these materials, you can gently scrub the contaminated area with a soft clean cotton cloth and acetone. These glues remaining on the window film are quickly and completely understood. A small amount of acetone does not damage the polyester film, but it immediately dissolves and completely evaporates the glue and most of the paint.
6. Do not use soft wipes, brushes, or sand. The above is some places to pay attention to the maintenance of architectural glass film, I hope that my DIY friends pay attention.
Mist Projection Screen,Fog Curtain Projection,Fog Screen Projection,Water Mist Projection Screen
Guangzhou Ewaterart Technology Co.,Ltd , https://www.ewaterart.com